Datrax 52-BRVoice RTU
The Datrax 52-BRVoice Remote Terminal Unit (RTU) is a complete, stand alone, remote data reporting system.
Aimed primarily at test instrumentation and process control, the Datrax 52-BRVoice is a cost effective solution
to many industrial applications. The board communicates over a standard dial-up phone line. When called, the RTU
answers the phone with a high quality male voice. The board can be programmed to say almost anything. The RTU can also
dial out if a predetermined setpoint is exceded for example. There is also a tone decoder built in which can allow you
to acknowledge the alarm, or operate a relay based on the number you press. The simple but powerful BASIC language allows
even begenning programmers to write useful programs easily and quickly. The unit can also be pre-programmed to match your
specifications. Typical applications include pressure or tank level alarms. The unit can be called to get measurements,
flows, levels, etc. or it can call out if an input has gone over or under a preset limit.
| Input/Output Signals
| Laptop computer Interface
|| Computerized Terminal
|| UPS Power Supply
| Eight (4-20mA) Analog Input
|| Programmable in Basic
|| Real Time Clock with Battery RAM
| Eight Digital (Status) Inputs
|| Single Circuit Board
|| NEMA-4 Housing
| Six Digital (Relay Driver) Outputs
|| Diagnostic Lamps
The Datrax 52-BRVoice is programmed using the Basic programming language. It is a very powerful, yet easy to use language.
It can significantly reduce the design time of many projects. The on-board EEPROM programmer
allows you quickly save your program and have it start automatically when power is applied to the board.
| Datrax 52BRVoice RTU
| UPS Power Supply
| Realtime Clock
| 12VDC to 24VDC Card
| NEMA-4 Housing
Key Telemetering Products
Phone (270) 683-9871
Cell (270) 929-2206